DIY textured roller

Quality, convenience, as well as the finished result of the work performed depend on such factors. That is why we will consider all its types, so that your work is not complicated, but brings you pleasure.

Type of fur coat

In our time, there are such types of this material:

• thread
• fur
• foam rubber
• Velor
• flock and some with a flat surface,
• textured and texture rollers for decorative painting.

Fur

When painting walls, such rollers are universal, since any type of paint can be applied with a fur roller, even paint made on an organic basis.

• the composition is qualitatively and evenly applied to the surface of the walls, which contributes to the easy implementation of the work with your own hands
• absorb enough paint
• when painting, the composition is not sprayed,
• Great for uneven surfaces such as decorative plasters.

Materials of which the villi are made of:

Fur coats can have a pile of different lengths. If you need to paint a rough surface, choose a coat with a long pile, if you need to paint a glossy surface, use a coat with a small pile.

How to do it right? To begin, soak the roller in kerosene, and then in plain water. If you used a roller to paint the walls with water-dispersion paint, caring for the tool will be even easier. In order to wash it, just use a hose with a water pressure.

Such painting is pleasantly performed, since it is applied with a beautiful uniform layer. If the surface was previously well prepared, then the painted surface will look completely smooth.

Often in construction stores, sellers say that such a tool is intended for specialists. Why? Because with careless work, all defective places will be visible on the surface. Another drawback is that the villi of the fur coat do not absorb a large amount of paint, which will force you to regularly moisten the roller.

Foam

The main advantage of this material is its price. For example, foam products can cost from 30-40 rubles. Such rollers can be applied to painting walls with water-dispersion paint. Among the shortcomings, one can distinguish such moments: poorly stains an uneven surface, short-lived, sprays paint. But, despite such minor flaws, this roller is not the worst option, especially when painting a small area. For example, walls in a kitchen or in a bathroom.

Rollers for decorative painting of walls

What does the concept of "decorative painting" mean? First of all, it is the application of patterns and drawings to the surface of the entire wall or to some specific place.

To perform this work, there are two types of rollers:

Such a structural roller is able to apply a beautiful ornament to your wall. The photo shows how the finished result looks.

Advantages of textured finish

When decorating the walls in the room, it is worth presenting two varieties - the use of special textured paint or the use of different finishing technologies. In applying the first option, you have to go to a hardware store and choose a special paint, which includes acrylic components. When finishing, such paint does not evenly fall on the surface, so you can get the effect of granulation.

Textured wall painting has many advantages: you can do it yourself without having any special building skills, this finish masks all irregularities well, the paint is non-toxic, prevents mold and is resistant to mechanical damage.

There is another embodiment of the decor - this is painting walls using stencils. Such coloring is carried out with a water emulsion substance. This finishing method has the following advantages:

• low cost of work,
• allows you to make a drawing, in those places where you will like,
• large selection of colors
• the ability to do it yourself, etc.

Textured Paint Tools

So, what can you need to perform decorative painting of walls? These are the following tools:

It is clear that not all of this list you will use. But these are all devices that can do the job. However, it also happens that there is no way to spend your money on various expensive rollers. What to do in this case? Do not panic, because at the moment you can show your imagination and make your own original design of the room.

Using a homemade tool

In order to make a textured roller, you need to fasten or glue pieces of foam rubber, fabric or cellophane on a regular one. After performing this procedure, you can use such a roller to apply a water-based composition to the surface of a wall or ceiling. This version of the decor will look very original and aesthetically pleasing. You can also use wire wound on a roller.

Conclusion

We advise you not to be afraid to take risks in order to decorate your interior, as there is nothing super complicated in performing such work. Moreover, you can save a lot of money that would have to pay for the services of a specialist. And thanks to the tools for applying paint to the wall, you can do everything quickly and efficiently.

Materials for the manufacture of decorative rollers

For the manufacture of textured rollers for painting walls, different materials are used.

The simplest of these is rubber.

On the rubber coating of the roller, protrusions of various shapes and sizes stand out with the help of which you can create a pattern or texture. For example, you can imitate brickwork or relief with beautiful patterns.

Wooden cylinder. Such textural tools are used to decorate children's rooms with images of different ornaments, since the tree is environmentally friendly, does not emit toxic substances.

Important. To get a picture on the wooden cylinder of the roller, you need to translate the patterns from paper with carbon paper:

1. Leather roller. Gives the effect of marble coating. It’s good to work with such a roller for applying Venetian plaster, you get a smooth surface on the wall.
2. Plastic. For the effect of a perfectly smooth surface, it is necessary to use such a tool on an absolutely flat surface. However, after prolonged use, the plastic has a tendency to crack.
3. Pile (fur) can be used both natural and artificial (polyamide, polyester or polyacryl) with different pile lengths. The length provides the degree of roughness and the depth of small patterns on the surface. Such decorative plaster helps mask uneven places on the wall.

Classification of decorative rollers according to the texture of the figure

These rollers are classified according to the texture of the image.

1. In the first case, the stamping of various bizarre fantasy and simple patterns and drawings is performed by a roller: they are connected to each other, as when stickering wallpaper paintings. A tool with a different force is pressed in to obtain a more or less pronounced textured relief. In this method, a roller with hard or soft rubber is used, which is rolled on the wet plastered surface of the wall. After that, it acquires a beautiful relief with a different texture. Such tools with a different pattern or just a rough cylinder make it possible to imitate different materials: fur and wood, textiles and stone chips, as well as bamboo fibers.
2. In the second case, a textured roller with a rough or patterned nozzle gives the texture of different materials on the wall: wood, brick or natural stone, as well as glazing to produce spectacular blurry spots. With their help, complex patterns on the plaster are repeated. The finish coating is applied after painting or plastering the wall. Decoration begins when the plane dries completely.

In any case, before working with the textured roller, the walls must be cleaned of dirt, the surface should be leveled and primed.

DIY textured roll

It is easy to make a textured roller with your own hands using old tools.

First you need to make a base - its cylinder. There are several options for blanks for the cylinder:

From an old wooden rolling pin. It should be smooth without handles. A hole is drilled in the center, a hard metal rod or wire is inserted there and bent.

Glue the cut parts of the clothesline on a rolling pin in random order - the texture roller is ready.

If you wrap the rolling pin with rubber wire, then you can also create a decoration tool.

Sleeves remain from the toilet paper, they will serve as the basis for the plaster roller. Several parts cut from foam or cardboard are glued super - “moment” on the sleeve. Then you can create.

You can make a textured roller with your own hands from thin rubber.

First, the rubber is cleaned and its surface thoroughly degreased. Then apply the desired pattern with a marker to decorate the wall or ceiling. Next, the gun is loaded with a sealant, then gently apply it according to the marking. If there is no experience with a textured roller, you need to choose simple patterns without thin curls and weaves. Textured drawings in the form of simple geometric shapes, leaflets will do.

You can use a foam roller to create a decor, wrapping it with a rope in large steps.

Patterning Techniques

There is a technique for applying a pattern using a textured roller.

Before you start working with decorative plaster, you should prepare the wall surface. This is necessary so that the plaster material holds well and does not crack. The entire surface of the wall for repair is cleaned of dirt, the remains of old wallpaper, treated with a primer.

To level the walls using putty using spatulas with different sizes. Putty is put, pushing it into the walls as much as possible without pressure. Then a second layer is applied, smoothed. After drying, they begin to decorate the walls in stages.

1. Dry plaster is mixed with water until a uniform consistency.
2. The mass is applied to the surface in a dense layer before proceeding to decorating, smooth.
3. Next, you need to suspend staining for a few minutes, wait until the mixture thickens.
4. Using a textured roller, the selected pattern is made.
5. In this case, it is advisable to work together so that one applies the plaster, and the second performs the creation of relief.
6. Finishing the walls with a coloring composition is done after 48 hours, after the plaster has completely dried.

Important. Finishing with a textured roller can be done using the finished mixture from the store, which is packed in a special sealed container.

If you use rollers, combining with other decorating tools, you can get original drawings. For example, to decorate the wall with a cute, spectacular polka-dot pattern, a roller is suitable together with a stencil made of thin plastic with one's own hands.

Exquisite is a relief pattern depicting "bamboo shoots." First, a decorative white solution is coated. If the main layer is still wet, the trowel performs the pattern of shoots of the bamboo plant. Then the wall is processed using wax application with a paint roller. At the finish, silver accents are made with decorative varnish of silver color, the picture is given even more expressiveness.

Important. In small rooms with low ceilings, large-patterned rollers visually reduce space.

With the use of decorative facade plaster, granite chips and brick can be imitated.

Application of textured paint by roller: video

Anyone can work with a textured roller, starting with simple unpretentious patterns. The decoration process is a pleasure where everyone can show their creativity.

There is a developed technique for applying textured paint with a decorative roller.

In order for the patterns to be qualitatively applied, when working with a textured roller, you must adhere to the following rules:

• when using the roller, it is impossible to press hard. Textured and volumetric drawings then turn out badly,
• when applying layers it is necessary to make smooth sliding movements, directing them from top to bottom,
• when laying the second track, make sure that there is no overlap with the first lane,
• if you want to apply acrylic paint for the decor of the protruding parts, you can paint with golden or silver paint,
• Acrylic paint can be used with dried plaster after about 48 hours.

If you have doubts when choosing a roller and working with it, you can watch a video where you can learn how to apply relief patterns.

Textured rollers and features of their use

To work with a textured roller, you do not need special skills and knowledge. It is enough just to prepare the paint and roll the instrument in a special cuvette. This must be done in order to avoid smudges when painting the surface. Yes, and the paint in this case will lay down in a uniform layer. And plaster - without clots and lumps on the surface.

Note! It is highly undesirable to use the same tool for different types of coatings. That is, for textured paint we use one type of tool, and for plaster, respectively, another. Such tools can be bought at the store or made independently.

Fourth option

Skillful craftsmen propose to make their own structural roller, for the creation of which you need to show imagination and a little bit of patience and perseverance. And in order to achieve high-quality coverage, you need to think through your idea in detail. You can also use patterns when covering a surface with a finishing material. So, to obtain structural plaster, it is worth considering the following option for creating a tool yourself:

• Take the old roller. And best of all, if it is foam.
• We take a dense fabric and cut out figures of the same size from it.
• We form fantasy flaps from the cuts and twist them according to the origami principle.
• We attach uniformly obtained flaps along the entire length of the roller with a construction stapler or pins.

In a word, you can create absolutely any structure on the wall using improvised materials.

The technique of applying plaster structural roller

To keep the plaster for a long time, you need to pre-treat the surface. If you plan to use a textured roller for painting the surface, then there is no need at all to paint the surface in the main color. However, it must be remembered that when working with a structural analogue, such a procedure is mandatory. Otherwise, the pattern on the roller will stretch the finished mixture in the wrong direction.

Paint the surface correctly

To achieve the best result, you should use the following tips:

• No need to press the tool close to the surface. Try to move carefully, without rushing.
• When working with a patterned roller for decor, it is recommended to start a new track from the place where the border of the previous picture passes. In no case should the drawing be overlapped.
• When reaching the ceiling, you need to press the tool to the top, after which you can continue to work again with the usual pressure.
• Use a brush to process corners, because it is not possible to paint over narrow joints with a roller.
• If the relief patterns turned out to be very convex, it is recommended to use a moistened mesh for grinding to correct them.
• Painting the surface with a roller with a pattern should be carried out with smooth movements and with special care. Try to maintain the evenness of the pattern and in no case need to rush. In some cases, when working, you can use special stencils made of dense material.

Useful Tips

To create a texture with an imitation of a "fur coat", textile fibers and marble chips, you can use a relief roller for applying paint with a textured base. It is recommended to apply the finishing material to the walls, having previously run the tool in a container with paint. If surpluses begin to form during operation, they must be removed with a spatula.

Using decorative rollers, you can create an original design that will not be inferior to the work of a professional. And all that is required of you is to choose an instrument with the right structure and turn on your imagination - and the result will certainly please you with its splendor.

Paint roller: how to choose a tool for translating a design idea

It is impossible to imagine a repair without a paint roller when it comes to painting walls. Due to the variety of products in the store, it is easier to choose such a tool. Meeting the needs of the buyer, the roller for applying an even layer of paint or creating a ribbed surface is considered an indispensable tool.

The indispensable assistant in painting the walls - roller: appointment

During repair or interior painting, a uniform coat of paint is applied to the overall area. In this invaluable help can be offered not so long ago by the invented device - the roller. With its help, it is quite simple and quick to paint the surface, and it can be either a monophonic coating, or decorative abundant in patterns.

How to choose by size

The main part of the device is a cylinder of various types:

1. 1. mini - having a diameter of 3–9 cm and a length of up to 15 cm. A tool with such a cylinder is used for painting surfaces with a small area,
   2. midi - medium-sized practical rollers. The cylinder diameter is 9 cm, and the length is up to 20 cm. This is a view for finishing the inner surface of the house,
   3. maxi - used for exterior decoration of the house. The diameter of this cylinder is 8 cm, the length is 30 cm.

The size of the tool is selected in accordance with the surface area to be painted. For small works use mini, and for extensive - midi and maxi.

Sometimes it seems that the use of large rollers for decorating the walls of rooms is better, since they are dimensional. But, during internal work, the base becomes heavy due to absorption, and the paint splashes or leaks. Another thing is painting the facade of the house: in the open air, the coating dries faster, so speed plays a decisive role. For such work, tools with a maxi-sized cylinder are used.

How to determine the pile length

The quality of the work depends on the correctly selected length of the fur coat pile. Depending on the surface structure for painting, rollers with different pile lengths are used.

1. Up to 5 mm. - for painting smooth surfaces (mainly varnishing).
2. 5-10 mm. - for painting ceilings and putty walls.
3. 5–20 mm. It is mainly used for painting concrete surfaces, unpolished wood or rough plaster.
4. 20-30 mm. Brick, concrete surfaces, walls with relief plaster, strong porosity and roughness paint the fur coats with a long pile length.

Smooth, smooth walls do not require special efforts for painting, a short pile will be enough. Another thing is a surface with many irregularities and roughnesses, for their decoration it is advisable to choose a roller with a long pile. A variety of combinations of options for these components makes it possible to choose the right tool for its use in painting work.

Grip varieties

The handle has a convenient shape for work, it is made of wood or plastic. There are no special standards for handles. When choosing a tool, a combination of size and weight must be taken into account: the handle should be comfortably covered by the hand, and the fur coat should not outweigh the handle, otherwise it will work hard.

Nozzle mount

The cylinder has three types of mounting.

1. Hard mount. Such a tool cannot be disassembled, after wearing the coat, the roller becomes unusable.
2. The presence of a coupling. If necessary, the coat is replaced with a new one.
3. Wireframe system. This view involves reusing the tool without a kernel.

Varieties of materials

A variety of materials makes it possible to choose the right tool for a particular type of work. There are a lot of types of fur coats:

• foam rubber
• fur
• velor
• thread
• polyamide
• polyacrylic
• polyester.

Each species has certain properties and, accordingly, price.

The fur coat dyes evenly, leaves no bubbles, it absorbs a small amount of paint, due to which there is almost no spray. The only negative - there is a separation of the fibers that remain on the painted surface.

If there are many cracks that need to be filled with paint, it is advisable to choose a tool with a longer pile. A roller with a velor coat has the same qualities as a fur coat, but does not leave a fleece. The painted surface remains perfectly flat.

The polyamide material is perfectly cleaned after use. Due to its resistance to aggressive environments, the coat does not deteriorate, easily absorbs and gives paint of any type (even those that contain water or synthetic solvents). Polyacryl is considered a lower-quality analog of polyamide, but it also paints well. However, if different types of paint are applied with a polyamide coat, then for a polyacrylic coat it is recommended only on a water basis.

The easiest coloring tool that can be found in hardware stores is foam rubber. It copes well with smooth surfaces, but paints roughness with difficulty. It has a low cost, because if it is bought only once, the option is quite suitable.

A separate option for painting: textured rollers

When you want to create an unusual texture on the wall surface, use textured rollers. For the effect of granulation, a fur roller and a special textured paint that unevenly lies on the surface will be required. Drawing is done using a special textured roller - screen.

Which is better to choose

The working tool must be selected in accordance with the expected result. Some types of textured rollers make it convenient to create beautiful patterns, while others completely paint the wall with the effect of ribbing. The aggressiveness of the paint used is also taken into account, choosing a fur coat from a suitable material under it.

Patterned with a pattern

An interesting option for painting the surface of the room is the screen rollers. Such fur coats are a cylinder on which the pattern stands.

The sizes of the stencils are from small (for painting small areas) to large (they are used to apply a picture to the entire surface of the wall). The lines smoothly connect, so you can easily paint the entire wall so that there will be no noticeable joints.

Use does not require skills or a lot of effort. The main thing is to adhere to some rules:

• carry out on the wall with a roller without pressing hard, the pace is unhurried,
• new paint is gained when the former is completely over.

How to choose according to the material used

Under a certain type of paint, the appropriate fur coat material is selected. Foam coat is used once, after which it becomes unusable. But to the more expensive rollers, which are planned to be used in the future, you need to select the paint in accordance with the stability of the fur coat material.

How to paint with water-based paint

For painting with water-based paint on smooth surfaces, 3 types of rollers are used:

The most commonly used is thread. Foam coat absorbs a large amount of paint, which affects the quality of work. A thread coat absorbs it less, because of which the paint lays more evenly. Choosing the right pile length also matters: the smoother the surface, the shorter it is.

How to paint with acrylic paint

Due to its special texture, acrylic is often used in painting, but requires a suitable tool. The most suitable option is velor. Foam rubber is also suitable, provided that it is of good quality.

For facade, exterior work, it is recommended to use a roller with a polyacrylic coat. Polyester coats are also suitable for such work if the pile is up to 6 mm, although a 18 mm long pile is recommended for rough and uneven surfaces.

How to choose: tips

When choosing a roller in a hardware store, pay attention to some features.

1. The roller should have a coat suitable for the chosen type of paint. It is worth making sure that the material from which the roller coat is made is suitable and will not deteriorate after the first use.
2. It is necessary to determine the amount of work, and then choose what size the roller should be.
3. If you need to put a picture on the wall - you need to choose it from the variety of proposed options for drawings. When painting the walls, rollers with different coatings are offered entirely.

Which roller to choose is up to the buyer. An informed choice of a working tool simplifies the creation of the desired effect.

Decorative

The decorative roller is easy to make at home from improvised means. For this house there should be an old waste roller. To create a decorative painting on the wall or ceiling, household items attached to the roller are used.

For example, you need a roller and a plastic bag, they are fastened together with tape. It is important that there are as many folds as possible, namely they will create a unique relief pattern on the surface. Instead of a bag, they also use elastic bands for hair, a net for vegetables, scraps of fabric and more.

An interesting option for creating at home a unique decorative roller using foil and acrylic putty. You will need a dense foil (such as from under the packages of dairy products) and an object that will be squeezed out.

With the help of the selected object on the foil, the pattern you like is minted: geometric shapes, stars, daisies, birds, straight lines, a square, interweaving of curving stripes.

A layer of acrylic putty is applied to the back wall of the minted foil, and is wrapped around the roller coat to give a cylindrical shape. The main thing is to do it quickly so that the putty does not have time to freeze ahead of time. At the last stage, the foil adheres to the roller.

Universal

Making a universal roller is easy. First, a cylinder is taken, for example, from under toilet paper, adhesive tape for removing lint from clothes or a tin beer can. It is pasted over with a woolen cloth or thin foam rubber, 1 cm thick, which will absorb the paint. A thick stiff wire bent by the letter “G” will become a yoke.

Tips & Tricks

Spray that remains on the walls after painting the ceiling can be painted over when processing the walls. But, for starters, it is worth preparing the paint. The paint tray into which paint is poured helps to regulate the amount of paint. The roller absorbs the mixture into itself, and the excess is squeezed out on an inclined wall, paint spatter is reduced to a minimum.

Today, the roller has become an indispensable tool in the repair. Due to the variety of its types, it is possible to make repairs as much as possible. The tool is easy to buy at a hardware store, and an old damaged roller can be given a “second life” using certain methods.